Suite 7.1 Installation Manual
www.ada-usa.com 15
Operating and Controlling the ADA Suite 7.1
Overview
The ADA Suite 7.1 has a minimum of front panel controls. This is largely because in most systems the
unit will be operated by a central control system. Nevertheless, you can still completely setup, control,
and operate the Suite the 7.1 with the front panel controls.
Base Version of Suite 7.1
Base versions of the ADA suite 7.1 do not have front panel controls or FL status display. This base
version of the Suite 7.1 is designed for use in systems where it will be controlled by a separate computer
based system with a touch screen or similar user interface. Other than the lack of controls and display,
the version of the Suite 7.1 has all the same internal functions and high performance DSP, digital and
analog circuitry.
Front Panel Display
The 4 x 25 front panel display provides complete status of all functions of the Suite 7.1 including
volume level, mute, incoming bitstream, decoding mode, selected input, enhancement features, and
other information. The front panel display also is also instrumental in setting up the Suite 7.1 including
channel levels input labels, and volume, balance and tone presets. The front panel display will be
described in throughout this section of the manual in context with the operation being discussed.
Power/Standby Switch
The front panel ON/OFF switch acts as both the master power and standby switch for the Suite 7.1.
When this switch is in the down position, you cannot turn the unit on from any other method. If the
switch was in the OFF (down) position moving this switch to the ON position will turn the unit on
without the need for any other control. Otherwise, the switch acts as a standby switch where you can
turn the unit on and off via the volume control knob, IR or software. If the Suite 7.1 is out of standby
when power is removed accidentally or with an AC controller, it will turn back on to its previous input,
mode, and volume level when power is restored.
Display Switch
When the main Power/Standby switch is in the ON (up) position and the Suite 7.1 is in standby, the
front panel Display switch activates the green backlight behind the front panel display. When the
Suite 7.1 is operating normally, the Display switch dims the backlight by about 50%. If the main ON/
OFF switch is in the OFF (down) position, the Display switch has no effect until the unit is turned on.
Volume Knob Functions
The volume knob has other functions in addition to controlling the master volume level. Pressing the
knob can also engage muting and take the unit in and out of standby.
Turning the Unit on
When Main power switch is in the ON (up) position and the Suite 7.1 is in standby, turning or
pushing any knob other than the Volume knob will cause the Suite 7.1’s center LCD display to indicate:
PUSH VOLUME FOR POWER ON. To take the Suite 7.1 out of standby, press the Volume knob once.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais